Avanti
AUDIO PHYSIC proudly present: AVANTI. However, it is not merely a relaunch of the classic model. The latest AVANTI is a newly developed loudspeaker through and through. The aim of our development team was to produce a modern loudspeaker that is equally stunning in terms of looks, engineering and sound quality.

AVANTI is impressive, not only due to its elegant appearance – whether in precious veneer or in a luxurious high-gloss finish in glass. More importantly, it combines numerous cutting-edge AUDIO PHYSIC technologies in its slender frame. It marks the first time that next-generation Hyper Holographic Cone Technology (HHC-III) has been used for mid-range drivers and tweeters. Through painstaking optimisation in the details, harmonic distortion levels were once again noticeably reduced. Thanks to their dual-basket design, the chassis are only indirectly connected to the baffle. Vast effort went into the design, yet – as seen in the high-end and reference-line models – it is rewarded by an impressively precise, extremely detailed and neutral sound.

As in the top series, AVANTI also benefits from the specially-engineered stiffeners in the cabinet. Reinforcements made of open-pored ceramic foam reduce the partial vibrations of the enclosure to negligible levels.

In this, special attention was paid to the bass. This is where the strongest forces are at work. The powerful woofer, an 8-inch long-throw chassis, is not positioned as usual on the side or front of the loudspeaker, but works instead in the interior in its own housing. This too is additionally stiffened using ceramic foam. The elaborate design offers a host of advantages. To begin with, the frequency range of the AVANTI extends to unbelievably low levels, whilst remaining incredibly contoured. What’s more, with respect to placement, the loudspeaker is less finicky than traditional designs. Even when placed close to the wall, these loudspeakers offer impressive sensitivity and clarity across the entire frequency spectrum.

The AVANTI is available in precious veneers but also in a version featuring a high-gloss finish in glass. In the glass design, the loudspeakers benefit even more from the intelligent, three-layer sandwich construction. The cabinet is stiffer, thus resulting in fewer distorting partial vibrations. Detrimental effects on the sound, generally associated with glass, do not crop up at all.

Like all AUDIO PHYSIC loudspeakers, the AVANTI series features a terminal panel equipped with nextgen™ terminals of the highest quality. Here as well, any micro-vibrations that could effect the sound are dampened by targeted means.

The AVANTI’s stylish traverses facilitate setup and guarantee a sure footing on any surface. Thanks to the M8 threads, the AVANTI can be easily equipped with the AUDIO PHYSIC VCF II M8 Magnetic feet. Their cutting-edge design enables a noticeably improved audio fidelity and reproduction authenticity. Not only that, the VCF II M8 Magnetic feet protect sensitive floors from scratches. Also available as options are platforms in high-gloss finish in black or white.

The latest AVANTI adeptly forms a bridge between the demands of a modern living environment and pure, uncompromising sound – totally aligned with our credo: No loss of fine detail.

Height 1087 mm / 42.8"
Width 170 mm / 6.7"
Glass / Veneer ~ 22 kg (Wood) ~ 27,5 kg (Glassversion)
Recommended amplifier power 30-180 W
Impedance 4 Ohm
Frequency range 31 Hz - 40 kHz
Sensitivity 88 dB


Sandwich Cabinet Construction
Our unique Sandwich Cabinets are an innovative way to stop the speaker cabinet from developing an acoustical life of its own. It is especially effective with our stylish glass-finished speakers as the relatively high weight of the glass panels helps dampening the cabinet even better.

>> WEITERE INFORMATIONEN >>


HHCM III – Hyper Holographic Cone Midrange
Many AUDIO PHYSIC Core Technologies have been combined to build the HHCM-III midrange driver. Together, they serve a single purpose: To guarantee an authentic rendition of the music, unaffected by any unwanted vibrations.

>> FURTHER INFORMATION >>


HHCT III – Hyper Holographic Cone Tweeter
Many AUDIO PHYSIC Core Technologies have been combined to build the HHCM-III tweeter. Together, they serve a single purpose: To guarantee an authentic rendition of the music, unaffected by any unwanted vibrations.

>> FURTHER INFORMATION >>


Invisible Subwoofer
Some of our speakers feature an internal woofer inside the cabinet provides the same deep bass and punch as an additional subwoofer without anyone ever having to see it.

>> FURTHER INFORMATION >>


Ceramic Foam Bracing
Ceramic Foam is a high-tech material used for internal bracing in many of our speakers. It is much stiffer than MDF although it consists of 85% air. This means, the room taken up by the internal bracing is also part of the effective volume of air the drivers need to work. By using Ceramic Foam, we can build loudspeakers that match and out-perform much bulkier speakers.

>> FURTHER INFORMATION >>


Dual Basket Design
AUDIO PHYSIC’S unique DUAL BASKET DESIGN is a true break-through innovation and the most important part of the HHCM-III technology. Instead of the tradition single basket, our HHCM-III features two separate baskets to prevent and subdue unwanted vibrations already at the source.

>> FURTHER INFORMATION >>  


Active Cone Damping
ACTIVE CONE DAMPING is a unique design to reduce resonances in metal diaphragms, developed exclusively by AUDIO PHYSIC.

>> FURTHER INFORMATION >>


Bi-Wiring/Bi-Amping optional
Most our speakers have a regular single-wiring terminal to avoid unnecessary metal or wire bridges that would harm sound quality when used in single-wiring configuration (Which is what most Hi-Fi fans actually use). However, an optional Bi-Wiring/Bi-Amping Terminal can usually be ordered with any new speaker. Retrofitting only on special request.


CCAC – Ceramic Coated Aluminium Cone
By coating a conical aluminium diaphragm with a special ceramic material, AUDIO PHYSIC creates a diaphragm that is at the same time very light as well as extremely rigid. When used together with ACTIVE CONE DAMPING technology the cone diaphragm is virtually immune against any partial oscillations that would otherwise impair the sound.

>> FURTHER INFORMATION >>


VCF – Vibration Control Feet optional
The best feet for our – and other – speakers. VCF provide a substantial improvement of sound performance by reducing transfer of unwanted vibrations while at the same time protecting delicate surfaces. Also available as VCF Component for Hi-Fi separates and as VCF Cable Supports.

>> Further Information >>


VCT – Vibration Control Terminal
Unwanted vibrations have negative effects on sound quality wherever they occur in the signal path. Because AUDIO PHYSIC has made it their mission to fight unwanted vibration and resonance whenever and wherever they occur, the fully decoupled VIBRATION CONTROL TERMINAL (VCT) has been devised.

>> FURTHER INFORMATION >>


3-Way Design
The 3-way speaker features three different drivers that share reproduction of the entire frequency range. One or more woofers, a midrange driver and a tweeter. Usually the crossover frequency between low and mid frequencies is set between 150Hz and 300Hz, and between 2,000Hz and 3,000Hz for the transition from the midrange to the tweeter.
Height 1087 mm / 42.8"
Width 170 mm / 6.7"
Glass / Veneer ~ 22 kg (Wood) ~ 27,5 kg (Glassversion)
Recommended amplifier power 30-180 W
Impedance 4 Ohm
Frequency range 31 Hz - 40 kHz
Sensitivity 88 dB


Sandwich Cabinet Construction
Our unique Sandwich Cabinets are an innovative way to stop the speaker cabinet from developing an acoustical life of its own. It is especially effective with our stylish glass-finished speakers as the relatively high weight of the glass panels helps dampening the cabinet even better.

>> WEITERE INFORMATIONEN >>


HHCM III – Hyper Holographic Cone Midrange
Many AUDIO PHYSIC Core Technologies have been combined to build the HHCM-III midrange driver. Together, they serve a single purpose: To guarantee an authentic rendition of the music, unaffected by any unwanted vibrations.

>> FURTHER INFORMATION >>


HHCT III – Hyper Holographic Cone Tweeter
Many AUDIO PHYSIC Core Technologies have been combined to build the HHCM-III tweeter. Together, they serve a single purpose: To guarantee an authentic rendition of the music, unaffected by any unwanted vibrations.

>> FURTHER INFORMATION >>


Invisible Subwoofer
Some of our speakers feature an internal woofer inside the cabinet provides the same deep bass and punch as an additional subwoofer without anyone ever having to see it.

>> FURTHER INFORMATION >>


Ceramic Foam Bracing
Ceramic Foam is a high-tech material used for internal bracing in many of our speakers. It is much stiffer than MDF although it consists of 85% air. This means, the room taken up by the internal bracing is also part of the effective volume of air the drivers need to work. By using Ceramic Foam, we can build loudspeakers that match and out-perform much bulkier speakers.

>> FURTHER INFORMATION >>


Dual Basket Design
AUDIO PHYSIC’S unique DUAL BASKET DESIGN is a true break-through innovation and the most important part of the HHCM-III technology. Instead of the tradition single basket, our HHCM-III features two separate baskets to prevent and subdue unwanted vibrations already at the source.

>> FURTHER INFORMATION >>  


Active Cone Damping
ACTIVE CONE DAMPING is a unique design to reduce resonances in metal diaphragms, developed exclusively by AUDIO PHYSIC.

>> FURTHER INFORMATION >>


Bi-Wiring/Bi-Amping optional
Most our speakers have a regular single-wiring terminal to avoid unnecessary metal or wire bridges that would harm sound quality when used in single-wiring configuration (Which is what most Hi-Fi fans actually use). However, an optional Bi-Wiring/Bi-Amping Terminal can usually be ordered with any new speaker. Retrofitting only on special request.


CCAC – Ceramic Coated Aluminium Cone
By coating a conical aluminium diaphragm with a special ceramic material, AUDIO PHYSIC creates a diaphragm that is at the same time very light as well as extremely rigid. When used together with ACTIVE CONE DAMPING technology the cone diaphragm is virtually immune against any partial oscillations that would otherwise impair the sound.

>> FURTHER INFORMATION >>


VCF – Vibration Control Feet optional
The best feet for our – and other – speakers. VCF provide a substantial improvement of sound performance by reducing transfer of unwanted vibrations while at the same time protecting delicate surfaces. Also available as VCF Component for Hi-Fi separates and as VCF Cable Supports.

>> Further Information >>


VCT – Vibration Control Terminal
Unwanted vibrations have negative effects on sound quality wherever they occur in the signal path. Because AUDIO PHYSIC has made it their mission to fight unwanted vibration and resonance whenever and wherever they occur, the fully decoupled VIBRATION CONTROL TERMINAL (VCT) has been devised.

>> FURTHER INFORMATION >>


3-Way Design
The 3-way speaker features three different drivers that share reproduction of the entire frequency range. One or more woofers, a midrange driver and a tweeter. Usually the crossover frequency between low and mid frequencies is set between 150Hz and 300Hz, and between 2,000Hz and 3,000Hz for the transition from the midrange to the tweeter.
Gallery
Please note: Real Glass or finishes might be different from paper printed catalogues. Products partially shown with optional accessories. Models and finishes availability may vary by country.


                

            
View all products